Have you ever been driving your Toyota Camry and noticed that the side mirror cover was looking a bit worse for wear? Whether it’s scratched, cracked, or just plain worn out, it’s important to replace it so that you have the best visibility when you’re driving.
In this article, we will go through a step-by-step guide on how to remove the Toyota Camry side mirror cover.
We will also talk about the benefits of replacing it, plus tips for installing a new cover.
So read on to learn how to take the cover off and replace it with a new one!
Table of Contents
Short Answer
To remove the side mirror cover on a Toyota Camry, begin by pressing down on the tab located on the side of the mirror cover and pulling it away from the mirror.
Then, remove the screws located behind the cover using a Phillips head screwdriver.
Carefully pull away the cover, and disconnect the wiring harness from the back.
Finally, replace the cover with a new one and reattach the wiring harness.
Benefits of Replacing the Side Mirror Cover
Replacing the side mirror cover on a Toyota Camry can be a great way to improve the look of your vehicle.
Not only does it make your car look more attractive, but it also gives it a more modern appearance.
In addition, replacing the side mirror cover can also protect the mirror from wear and tear, as well as from the elements.
The side mirror cover is made of a durable plastic material, which means it is resistant to scratches and fading.
Additionally, the side mirror cover is designed to fit snugly against the mirror, providing a tight seal that helps keep dirt, dust, and moisture out.
Replacing the side mirror cover is also an excellent way to improve visibility, as the clear plastic cover allows for maximum light transmission.
Finally, replacing the side mirror cover is an easy and relatively inexpensive way to upgrade the look of your Toyota Camry.
Identifying the Screws on the Inside of the Mirror Cover
When it comes to removing the side mirror cover of a Toyota Camry, the first step is to locate the two screws located on the inside of the mirror cover.
These screws are usually located at the edge of the cover closest to the cars body and can be difficult to spot at first.
To make the process easier, you can use a flashlight and look around the edges of the cover to identify the screws.
Once youve identified the screws, youll need to use a Phillips-head screwdriver to remove them.
This is a fairly simple process and should only take a few seconds.
Once both of the screws have been removed, youll be ready to move on to the next step.
Removing the Screws
Removing the side mirror cover on a Toyota Camry is a simple process that requires just a few steps.
The first step is to locate the two screws located on the inside of the mirror cover.
It is important to make sure that the screws are properly loosened, as they are responsible for keeping the cover securely in place.
Using a Phillips-head screwdriver, apply pressure to the screws and turn them counterclockwise until they are completely removed.
Be sure to take your time and not rush the process, as the screws can easily become damaged if they are not removed with care.
Once the screws have been removed, the cover should be able to be pulled away from the mirror with ease.
Gently Pulling the Cover Away from the Mirror
Removing the side mirror cover on a Toyota Camry is a relatively simple process that requires only a few tools.
The first step is to locate the two screws located on the inside of the mirror cover.
These screws will be visible when you open the car door, so it should be easy to find them.
Once the screws are located, use a Phillips-head screwdriver to remove them.
Once the screws are removed, the next step is to gently pull the cover away from the mirror.
It is important to use caution when doing this, as the cover is fragile and can be damaged if pulled too hard.
To ensure that you don’t accidentally damage the cover, use your hands to slowly pull the cover away from the mirror in a straight line.
It should come off easily.
Once the cover is off, you can either replace it with a new one or clean it and reinstall it.
If you are replacing the cover, make sure that the new one is the correct size and is securely attached to the mirror.
If you are cleaning and reinstalling the existing cover, use a damp cloth and a mild detergent to wipe it down.
Once it is clean, place it back on the mirror and use the screws to secure it in place.
With a few simple steps, you can have a new Toyota Camry side mirror cover in no time.
Replacing the Cover with a New One
Once the Toyota Camry side mirror cover has been removed, you can replace it with a brand new one.
First, make sure to purchase the correct cover for your specific model of Camry.
The cover should be the exact same size, shape, and color to ensure a perfect fit.
Once you have the correct cover, start by lining up the cover with the side mirror.
Make sure the tabs on the cover match up with the slots on the side mirror.
Once the cover is in place, use a Phillips-head screwdriver to secure the cover with the two screws that were originally removed.
Tighten the screws until they are secure, but be careful not to over-tighten them, as this can cause damage to the cover.
Once the screws are secure, check to make sure that the cover is snug and secure against the side mirror.
You should now have a brand new Toyota Camry side mirror cover in place.
Cleaning the Cover and Re-Installing It
Once the Toyota Camry side mirror cover is removed, you can either replace it with a new one or clean it and re-install it.
If you decide to clean the cover, you’ll first need to clean off any dirt and debris that has collected on the cover.
To do this, use a microfiber cloth and some mild detergent.
Gently wipe the cover down, making sure to remove all dirt and grime.
Once the cover is clean, rinse it off with clean water and dry it off with a clean, dry cloth.
Now that the cover is clean, you’ll need to re-install it.
Start by aligning the cover on the mirror, making sure that the screws holes are lined up.
Once the cover is in place, use the Phillips-head screwdriver to re-install the screws.
Tighten the screws down firmly, but not too tight.
Finally, check to make sure the cover is firmly in place and that it is securely attached to the mirror.
With a few simple steps, you can easily remove and clean the Toyota Camry side mirror cover.
Doing this regularly will help maintain the mirrors appearance and ensure that it stays in top condition.
Tips for Installing a New Cover
Once you have the old cover removed from your Toyota Camry, you can begin the process of installing a new side mirror cover.
Before you do so, it is important to make sure that you have the correct type of cover for your vehicle.
Check the manufacturers website for the correct part number before you purchase a new cover.
Once you have the correct cover, make sure that you have the necessary tools on hand to complete the job.
You will need a Phillips-head screwdriver to attach the cover to the mirror.
You may also wish to have a damp cloth on hand to wipe down the mirror and the cover before installation.
When you are ready to begin, make sure that the location you are working in is well lit and free of debris.
Place the cover over the mirror and line up the holes in the cover with the screw holes in the mirror.
Carefully insert the screws into the holes and tighten them by hand.
Once the screws have been inserted, use the Phillips-head screwdriver to lightly tighten them.
Be careful not to over-tighten the screws, as this could damage the cover or the mirror.
Once the screws are tight, gently tug on the cover to make sure that it is securely attached.
If it feels secure, you can use the damp cloth to wipe down the cover and the mirror to remove any dust or smudges.
Your Toyota Camry side mirror cover is now ready for use!
Final Thoughts
By following the steps outlined in this guide, you can easily and quickly remove the side mirror cover of a Toyota Camry.
Not only does replacing the cover give you a fresh and clean look, but it also helps to improve the visibility of the side mirror.
If you’re feeling confident, why not take this a step further and replace the cover with something brand new? With just a few steps, you can make your Toyota Camry side mirror look good as new.
So, what are you waiting for? Get out there and get started!